I just tried your exact spot and baud between computer and the radio and it DOES NOT work here. VFO B mode never changes. The radio sends a U twice just like it should when changing both VFO's to USB but VFO B does not change. I agree with Clark, This may be a problem in the particular "order" in which the commands are sent. My setup is as follows Intel pentium IV 2.4 GHz. 512 meg. memory Radio on Com 1 Operating system is XP Home
73 de Tony, KD4K My Weather Page http://home.adelphia.net/~tonycash/ My Ham Radio Page http://home.adelphia.net/~tonycash/kd4k/radio.html Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page http://home.adelphia.net/~tonycash/sawnee/index.html ----- Original Message ----- From: "Al Bailey" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, December 19, 2002 11:49 AM Subject: [DXBase] Kenwood TS-2000 users. > I noticed some users are having problems with DXBase 2003 and the > Kenwood TS-2000. I decided to try using a spot which incorporated > both VFO's and this is the spot I used. > > VE3WQ 28496.7 TI9JJP qsx 28501 Cocos Is 1411 19 Dec > > > Once I clicked on it both VFO's responded as they are supposed to. In > VFOa I had 28496.7 USB and VFOb I had 28501.0 USB which is exactly > as it is supposed to do. Prior to the spot I had 50125.0 in VFOa and in > VFOb I had 432.100 FM. > > I am using a Lavaport serial board and COM:3 with settings of 4800 baud > No parity, 8 bits and 2 stop bits. I have also went into my Kenwood TS2000 > and set the baud rate using Menu Number 56 to 4800 baud. > > My operating system is Windows 98SE and the PC is a Gigabyte GA-8HIXP > and Intel Pentium IV at 2.4 gig. > > I hope this helps others clear this up but from where I am sitting I see no > problem with DXBase regarding rig control with the TS2000X. > > Best wishes for the holidays and best 73 de K8SIX > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
