Art, I hope that I can answer all of your questions:
(1) the VIA problem -- in the Appearance Condition for that TEXTBBOX - be sure and put Len(MGR)>0 (2) I did my freq a bit different -- and if you want, you can look at a webpage at my website at: http://www.qsl.net/wa6axe/freqfrmt.html (3) WRT the QSL card stock -- the one place that is available and is GOOD is at: http://www.hamstuff.com/QslKitPage/qslkit.html Gud Luck!! 73 de Joe WA6AXE Art Searle wrote: > > I've managed to create my own elaborate QSL card with DXBase and not without > a very heavy learning curve (for me anyway). I do have a couple of small > problems, mostly involving formulas, that I haven't been able to resolve. > > 1) VIA - My via command is: If(MGR<>CALL,"via "+MGR,"") > But sometimes the VIA prints even with the MGR = CALL, Other cases don't. > > 2) Frequency in MHz with 3 decimal places - I am trying to divide the > frequency by 1000 and still show 3 decimal places, for example 14.025 > My command for this is: val(Fstr$((Val(FREQ)/1000),"###&.###")) > But all I get in the above example is 14.03 > Any ideas? > > And a couple of questions: > > 1) I chose 5 x 3.5. Where can I get perforated (I assume) paper stock for > this? > > 2) Is there much of a selection of different weight and finishes? > > Boy is this tedious. So far I have this: > http://www.birdsandbeacons.com/qrp/ > > Help, > > Art > W2NRA > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase
