Hi Joe, Thanks for your help. You've set me in the right direction.
> I hope that I can answer all of your questions: With slight modification, you did. > (1) the VIA problem -- in the Appearance Condition for that > TEXTBBOX - be sure and put Len(MGR)>0 I wanted my "via MGR" to not include a repeat of the if the CALL was the same. This nested "if" statement worked for me: If(Len(MGR)=0,"",if(MGR=CALL,"","via "+MGR)) > (2) I did my freq a bit different -- and if you want, you can > look at a webpage at my website at: > > http://www.qsl.net/wa6axe/freqfrmt.html I wanted both MHz and Freq if freq was in the log. I wanted MHz for the manager who is in a hurry and the Freq for the casual contact who might be interested in the frequency. However if I were going to combine it I would have done it a little different. On your website I believe your frequency command : If(Len(MHZ)>1 and (Len(MHZ)<3), Left$(FREQ,2) +"." + Mid$(FREQ,2,3), Left$(FREQ,1) +"." + Mid$(FREQ,1,3)) Here's mine: if(Val(FREQ)=0,MHZ,Fstr$(Val(FREQ)/1000,"-###&.###")) I assume you are a programmer. I'm an accountant. We're more frugal. :^) > (3) WRT the QSL card stock -- the one place that is available > and is GOOD is at: > > http://www.hamstuff.com/QslKitPage/qslkit.html Thanks for the link. But forgive my ignorance. What means WRT? Another comment, obvious to most but not to me, all of the templates put MYCALL when you should be using OPRCALL. This way if you get an old request for a QSL from a previous callsign you're all set. I even put in an extra text box above the callsign box that puts in my current and ex calls if the OPRCALL is different from MYCALL. Again, thanks for your help. It sure takes a lot of time to get what you want but it's fun too. BTW I put my card with your changes on: www.w2nra.com 73, Art W2NRA
