Hello to all,
I am a long time LogWindows user (currently version 4.03.03.00) attempting
to convert to DXbase 2004.
I am having some problems getting the log over. I have over 13,000 QSOs in
it. I have been outputting to ADIF and importing that to DXbase. one problem
I am having is that in a large block of records, the time is lacking a colon
(e.g. 1345 instead of 13:45). apparently Log Windows doesn't care, but the
import to DXbase program does and rejects them all.
If this was 10-15 years ago, I would export from Log windows to ASCII and
write a simply interpretive Basic program to change the data and reload into
LogWindows and then export to ADIF. However I don't know how to accomplish
the same in today's technology. I am looking for any suggestions on how to
do this. Thanks,
Ken W7TS
I have MS Office 2000 premium, and visual basic 6, put really have not tried
to write anything with it yet.
-------------------
Kenneth E. Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
Voice: (303) 684-0037
Fax: (303) 776-5088
E-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
ALPCA #8339
ARRL-LM
-------------------
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of k6anp
Sent: Thursday, May 01, 2003 08:49
To: Ron Stordahl
Cc: [email protected]
Subject: Re: [DXBase] Com Port problems
Ron : I used a COMPUSA, PCI High-Speed 2-Serial and 1- parallel port
adapter, sku 271773.
It installed including software without a hitch. It was a piece of cake.
Len, K6ANP
At 09:56 AM 5/1/2003 -0500, Ron Stordahl wrote:
>k6anp wrote:
>
>>Hi Jack;
>>
>>Just a quick note to let you know I now have DXBase 2004 up and working
>>with both rotor controls. I replaced my ISA serial port card with a PCI
>>card and everything is working fine.
>>
>>I don't know why the the ISA card would work with DXBase 2002 but would
>>not with 2004. Anyway it is operational.
>>
>>I want to thank you and many others for the advise and suggestions.
>>
>>73,
>>Len, K6ANP
>
>Len...what particular PCI card did you use? Glad you got it going.
>
>Ron, N5IN
_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - -
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase
