I do it the same way as you do. I mark certain qso's for qsling. Then usually on Sundays I do the actual printing. When I'm finished, I get a message asking if I wish to mark these qsl's as being send. I say yes and the qsldatesent column is so marked.
----- Original Message ----- From: "Malcolm Rothwell" <[EMAIL PROTECTED]> To: "Bill" <[EMAIL PROTECTED]>; <[email protected]> Sent: Saturday, October 11, 2003 7:43 AM Subject: RE: [DXBase] Populating the QSL Sent Column > Hello Bill, > > You need to check "Populate QSLS on Label Save" in the Tools/Options/Log > Defaults. That should fix it > > 73's Mal G4KFT > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Bill > Sent: 11 October 2003 12:20 > To: [email protected] > Subject: [DXBase] Populating the QSL Sent Column > > After importing my log to DXB 2004, uneventfully, I decided to do my QSLing > for the month. I had to do a little modifying to the label but that went ok > too. I printed the labels and selected that I wanted DXBase to update the > QSL sent column. The labels printed fine but no update of the QSL sent > column. I have done this many times with DXB 2003 without a problem. > > I hope this is nothing more than cockpit problems on my part, but I didn't > see anything in the help files. > > Bill, W5VX > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
