Oops, meant to say "not with DXbase" below. I use DXbase everyday!!!
73, Don ----- Original Message ----- From: "Don Hill AA5AU" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[email protected]> Sent: Thursday, November 20, 2003 7:07 PM Subject: Re: [DXBase] CW Keying question > Wow. Great info. I use the W1WEF with WriteLog but not DXbase. I > started building my own interface box using the W1WEF circuit. It's described > at http://www.aa5au.com/rttyinterface.html. It does CW, FSK & PTT. > > 73, Don AA5AU > > ----- Original Message ----- > From: "Larry - K2GN" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, November 20, 2003 6:32 PM > Subject: Re: [DXBase] CW Keying question > > > > Problem solved. > > > > Thanks to Jim, K8IR > > "While TR and Writelog could key CW, DXBase could not. This was on > > a computer running Windows 98. It only happened using the on-board Serial > > Port. A plug-in card worked OK. > > I came up with an interesting solution. If I ran CWType > > ( http://www.aalog.com/en/products/cwtype/ ) , minimized it, and ran DXBase, > > then the CW keying was OK out of DXBase. Apparently the drivers loaded for > > CWType provided whatever was missing with DXBase. This by the way, was with > > DXBase 2003. " > > > > The Win98 DXbase2003 fix of Jim's worked for me with DXBase2004 and > > Win2000Pro. > > > > Thanks, Jim > > > > Larry/K2GN > > > > > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
