I had CW working using N1MM but not using microHAM Have no other programs running such as MMTTY, microHAM is using Port 6 I have tried different settings on DTR and RTS with no luck. everything else works fine, I was keying CW using RIGblaster before.
73, Dennis -----Original Message----- From: FireBrick <[EMAIL PROTECTED]> To: [EMAIL PROTECTED]; [email protected] Sent: Mon, 22 Mar 2004 14:42:47 -0600 Subject: Re: [DXBase] microHAM question 1. Did you EVER have CW working? 2. Does CW work using that interface with other programs such as Writelog? 3. Due to some crazy glitch, you may be able to get cw to work if you have a different program such as MMTTY already running. And both MMTTY and DXB are set to the same com port parameters. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, March 22, 2004 2:20 PM Subject: [DXBase] microHAM question > I just installed the microHAL interface and can't get it to send CW. > What is the configuration for the microHAM and an IC-746PRO? > > Thanks - KK7X > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
