I didn't phrase that correctly. Did you ever have cw working in DXBase? Not with rigblaster.
Getting DXBase to send CW can be difficult. First find out if any other program can send cw via the Microham. When I asked about MMTTY, I should have explained more fully. MMTTY uses a comport. If you set MMTTY to use the same com port as DXBase and open it, letting it just run in the background, sometimes this will activate the com port and DXBase can now send cw. Don't ask me why, but it does with me. Start simple....then work up. Just about any interface will send cw from WRitelog. That's why I asked if you had Writelog.... ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[email protected]> Sent: Monday, March 22, 2004 2:59 PM Subject: Re: [DXBase] microHAM question > I had CW working using N1MM but not using microHAM > Have no other programs running such as MMTTY, microHAM is using Port 6 > I have tried different settings on DTR and RTS with no luck. > everything else works fine, I was keying CW using RIGblaster before. > > 73, Dennis > > > > -----Original Message----- > From: FireBrick <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED]; [email protected] > Sent: Mon, 22 Mar 2004 14:42:47 -0600 > Subject: Re: [DXBase] microHAM question > > 1. Did you EVER have CW working? > 2. Does CW work using that interface with other programs such as > Writelog? > 3. Due to some crazy glitch, you may be able to get cw to work if you > have a > different > program such as MMTTY already running. And both MMTTY and DXB are set > to the > same com port > parameters. > > > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, March 22, 2004 2:20 PM > Subject: [DXBase] microHAM question > > > > I just installed the microHAL interface and can't get it to send CW. > > What is the configuration for the microHAM and an IC-746PRO? > > > > Thanks - KK7X > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
