I am using the 4 comport, 1 lpt port card with no problem at all, all ports are working. The is my 2nd card, first one was a ISA card and this one is the PCI card. Everyone I know have had good luck with them.
http://www.byterunner.com/byterunner/category=4+Serial+(RS-232),+1+Parallel+PCI-bus+cards/exact_match=exact Hope this help. JOe K0BX Al Bailey wrote: > Has anybody used the Byterunner model PCI-800H-9 PCI to Serial adabter > and if so does it work OK ? I have heard horror stories about IRQ problems > with some multi port boards and do not want to buy a card I have to > fight with. :) > > Any info will certainly be appreciated. > > 73 de K8SIX > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > -- Stop the insanity! Please do not add me to any distribution lists (Joke, Stories or Junk) without my permission. From [EMAIL PROTECTED] Thu Dec 1 22:12:56 2005 From: [EMAIL PROTECTED] (FireBrick) Date: Thu Dec 1 22:40:53 2005 Subject: [Dxbase] Byterunner PCI to 8 Port Serial Adapter References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I USED to use a Byterunner. I can't remember the exact model. I did use it on a windows xp machine and I had to get a revised driver from Byterunner. The guy at Byterunner was very helpful. I had the eight port I think.... But it did have a little work to get the various port assignments correct with the correct settings. I might suggest, a much simpler choice. I've had VERY good luck with SIIG multiport cards..... The drivers are very easy to install. And ...they are very cheap on eBay. ----- Original Message ----- From: "Al Bailey" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, December 01, 2005 6:29 PM Subject: [Dxbase] Byterunner PCI to 8 Port Serial Adapter > Has anybody used the Byterunner model PCI-800H-9 PCI to Serial adabter > and if so does it work OK ? I have heard horror stories about IRQ problems > with some multi port boards and do not want to buy a card I have to fight > with. :) > > Any info will certainly be appreciated. > > 73 de K8SIX > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
