First Question: How many comports does your computer physically have? Second Question: Did you check 'System' to indeed see if the comports were active? What are it's parameters? Third Question: Do you have any other devices connected to the computer that is using a comport? Forth Question: What type of computer, what type of OS?
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, January 30, 2006 10:30 AM Subject: [Dxbase] HF radio failed to respond >I have changed my computer and now cannot get the radio to respond. > > My settings are:- > > Yaesu FT1000MP > Tick Connect to HF Radio > |NO tick Default DTR > 4800 Baudrate > 8 Wordlength > 1 Comport ( but how do I detect which port is now used? have tried > changing it > without any luck so far as I thought that this might be the problem > None Parity > 2 Stop bits > I only use SSB so "Set HF Radio RTTY mode" has a DOT in USB > "Non serial port type interface" has DOT in NONE > > My logging programme works OK so I assume that the transfer of the software > to the new > computer was done OK...but maybe I am wrong? Help appreciated; thank you > > Hal > EA5SX > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
