Steve, Look at the QSL Info window. If you click on the call you just worked it will show up in the DX Call box. Or you can manually type it in there. If you are connected to a DX spotting cluster, click on the Lock button to prevent the call from changing if a new spot is posted. Right below is the Manager box. Enter the manager's call there. Note the two radio buttons at the bottom of the screen to "Use DXbase" or "Use CDROM". The address windows may or may not have info for the managers call. If you don't use a call book CDROM check the "Use DXbase" radio button. In the DXbase Address box you can manually enter the QSL managers address OR go to QRZ and hunt up the manager's call. When it comes up, click on the call and a window will open with his address info. Copy it and then paste it into the DXbase Address window. Hit the Save button and a window will pop up and ask if you wish to add the manager's address info to the data base. Click yes and another window will pop up and ask if you want to save the manager's call as the routing for the DX call. Again say yes. Now the call and his manager info is in the DXbase data base.
Set the QSL Via field set to either Manager or Mgr-Buro. Once that is set click on the QSO label icon in the tool bar and the info will be sent to the Pending Label data window. If you are sending direct also click on the Address label icon in the tool bar and the manager's address info will be sent to the Pending Label file. Before you print the labels go to Output/Standard Reports/Database Topics/Label Topics and print one of the adxf.rpt reports. This gives you a cross reference list of the calls and their manager so you get the card into the right envelope for mailing. If you clicked on the Lock button to prevent the call from changing due to a new spot, click it again to free it up. 73, Gary AL9A ----- Original Message ----- From: "Crownhaven" <[email protected]> To: "DXBase Reflector" <[email protected]> Sent: March 09, 2010 7:38 PM Subject: [Dxbase] Inserting QSL Manager > When I log a QSO and the op gives me his route or manager, where do > I/how do I enter that into the record so it is reflected when the card > is printed? I see where you can select the route, i.e., manager but I > don't know where to enter the call of the manager. This was easy in > 4.0. :))))))) > > I did review help files but couldn't find it. > > Steve, N4JQQ > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
