Gary, makes perfect sense. I appreciate your assistance. 73, Steve, N4JQQ
Gary AL9A wrote: > Steve, > > Look at the QSL Info window. If you click on the call you just worked > it will show up in the DX Call box. Or you can manually type it in > there. If you are connected to a DX spotting cluster, click on the > Lock button to prevent the call from changing if a new spot is > posted. Right below is the Manager box. Enter the manager's call > there. Note the two radio buttons at the bottom of the screen to "Use > DXbase" or "Use CDROM". The address windows may or may not have info > for the managers call. If you don't use a call book CDROM check the > "Use DXbase" radio button. In the DXbase Address box you can manually > enter the QSL managers address OR go to QRZ and hunt up the manager's > call. When it comes up, click on the call and a window will open with > his address info. Copy it and then paste it into the DXbase Address > window. Hit the Save button and a window will pop up and ask if you > wish to add the manager's address info to the data base. Click yes > and another window will pop up and ask if you want to save the > manager's call as the routing for the DX call. Again say yes. Now > the call and his manager info is in the DXbase data base. > > Set the QSL Via field set to either Manager or Mgr-Buro. Once that is > set click on the QSO label icon in the tool bar and the info will be > sent to the Pending Label data window. If you are sending direct also > click on the Address label icon in the tool bar and the manager's > address info will be sent to the Pending Label file. Before you print > the labels go to Output/Standard Reports/Database Topics/Label Topics > and print one of the adxf.rpt reports. This gives you a cross > reference list of the calls and their manager so you get the card into > the right envelope for mailing. > > If you clicked on the Lock button to prevent the call from changing > due to a new spot, click it again to free it up. > > 73, > Gary AL9A > > > ----- Original Message ----- From: "Crownhaven" > <[email protected]> > To: "DXBase Reflector" <[email protected]> > Sent: March 09, 2010 7:38 PM > Subject: [Dxbase] Inserting QSL Manager > > >> When I log a QSO and the op gives me his route or manager, where do >> I/how do I enter that into the record so it is reflected when the card >> is printed? I see where you can select the route, i.e., manager but I >> don't know where to enter the call of the manager. This was easy in >> 4.0. :))))))) >> >> I did review help files but couldn't find it. >> >> Steve, N4JQQ >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
