Thanks a lot. I've tried the option.4 bits 1:0 for a working line when these bits were 00, but it contiue work when I've set it to 10 (T1.413). I know that these dslam was G.dmt, so I have no idea about the option.4 setting. How can I read the Stat 0 bit 4 that you mentioned?
Regards, Jianliang lu ---------- Original Message ---------------------------------- From: "Farahmand, Rouzbeh" <[EMAIL PROTECTED]> Date: Fri, 26 Aug 2005 16:43:27 -0400 >Hi Jianliang, >As Gilles mentioned you can read/write CMVs to check/setup ADSL standards, specifically: >For setup: > >OPTN 4, bits 1:0 > >00 = Multimode (G.dmt and T1.413) >01 = G.dmt only >10 = T1.413 only > >To check how the link came up: > >STAT 0, bit 4 > >1 = G.dmt mode >0 = T1.413 mode > >Rouzbeh > > >________________________________ > >From: [EMAIL PROTECTED] on behalf of Gilles Espinasse >Sent: Fri 8/26/2005 4:06 PM >To: [EMAIL PROTECTED]; eagle-usb driver developments >Subject: Re: [Eagleusb-dev] How to configure ADSL_STANDARD on eagle modem > > > > >----- Original Message ----- >From: "Jianliang Lu" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Friday, August 26, 2005 7:10 PM >Subject: [Eagleusb-dev] How to configure ADSL_STANDARD on eagle modem > > >> Hi all, >> during our test for eagle-II modem we have had the problem to sync >> with Siemens chipset infineon. We think that may be a adsl >> operation mode setting problem. We'd like to know how to set the >> adsl operation mode (standard, like G.992.x, T1.413 etc.), and how >> can we get the information about the setting on modem. This >> information was showed in Cxacru driver for Conexant Access Runner >> chipset, but I don't know if we can get it also on eagle-usb >> driver. >> >> Regards, >> >> Jianliang Lu >> >information is in CMV Manual 1-22-2002.pdf send to the list by ADI >at page 129 for ATU-C (dslam side) >at page 131 for ATU-R so the one for our side > >To my understanding, OPTN.adsl_standard is optn4 according to page 16 > >It only remain now to use the various bits and calculate desirated optn4 >value. > >Gilles > > >_______________________________________________ >Eagleusb-dev mailing list >[email protected] >https://mail.gna.org/listinfo/eagleusb-dev > > >
