hello,

j'ai un léger problème avec une slackware current et
le driver 2.3.1/2.

En fait je n'arrive à obtenir la synchro que lors de
l'eagleconfig réalisé juste après la compile/install
!!! 

si je reboot, que j'eteint/allume la machine, que je
débranche/rebranche le modem, ou que je fasse un
"eaglectrl -w" directement, il m'est alors impossible
de synchroniser.

A priori, le problème semble venir des cmvs car
lorsque
je fait une installe avec un "./configure
--disable-cmvs", le problème disparait.


configuration du poste :
  A7V8X-X + sempron 2400+

  Slackware (version personnalisée, cd générés à
partir
  de la 10.1 + mises à jour vers current)

  kernel 2.4.30 de base (jai eu le même genre de
problème -et le même genre de remède- sur une
précédente installation avec un
2.6.11.11 et 2.6.11.12)

------------------------------------------------------
eaglediag -mscui (obtenu juste après un reboot:cmvs
activé)
------------------------------------------------------
Diagnostic (1.22 2005/03/20) driver eagle-usb
20050627155558
# System Information
Linux blackdog 2.4.30 #12 Sun May 1 19:31:23 PDT 2005
i686 unknown unknown GNU/Linux
Slackware 10.1.0
Linux version 2.4.30 ([EMAIL PROTECTED]) (gcc version 3.3.5)
#12 Sun May 1 19:31:23 PDT 2005
version gcc 3.3.5 used : 3.3.5
# Dependances
Verify dependances on source by hand
(kernel-source...)
lrwxrwxrwx   1 root root   12 2005-06-27 12:01 linux
-> linux-2.4.30
drwxr-xr-x  15 root root 4096 2005-05-02 03:58
linux-2.4.30
# Kernel config : usb modules
usbmouse                1880   0  (unused)
input                   3200   0  [keybdev mousedev
hid usbmouse]
eagle-usb             112804   0 
uhci                   24284   0  (unused)
ehci-hcd               17516   0  (unused)
usbcore                59148   1  [acm hid usbmouse
eagle-usb uhci ehci-hcd]
# pci & usb configuration (check for latency, only
keep relevant lines about USB)
00:00.0 Host bridge: VIA Technologies, Inc. VT8377
[KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI
Bridge
00:10.0 USB Controller: VIA Technologies, Inc. VT6202
[USB 2.0 controller] (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202
[USB 2.0 controller] (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT6202
[USB 2.0 controller] (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0
(rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA
Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus
Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies,
Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:13.0 Ethernet controller: Realtek Semiconductor
Co., Ltd. RTL-8029(AS)
01:00.0 VGA compatible controller: nVidia Corporation
NV11 [GeForce2 MX/MX 400] (rev a1)
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT8377 [KT400
AGP] Host Bridge (rev 0).
      Prefetchable 32 bit memory at 0xf8000000
[0xfbffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8235 PCI
Bridge (rev 0).
      Master Capable.  No bursts.  Min Gnt=8.
  Bus  0, device  16, function  0:
    USB Controller: VIA Technologies, Inc. USB (rev
128).
      IRQ 3.
      Master Capable.  Latency=32.  
      I/O at 0xd800 [0xd81f].
  Bus  0, device  16, function  1:
    USB Controller: VIA Technologies, Inc. USB (#2)
(rev 128).
      IRQ 3.
      Master Capable.  Latency=32.  
      I/O at 0xd400 [0xd41f].
  Bus  0, device  16, function  2:
    USB Controller: VIA Technologies, Inc. USB (#3)
(rev 128).
      IRQ 3.
      Master Capable.  Latency=32.  
      I/O at 0xd000 [0xd01f].
  Bus  0, device  16, function  3:
    USB Controller: VIA Technologies, Inc. USB 2.0
(rev 130).
      IRQ 3.
      Master Capable.  Latency=32.  
      Non-prefetchable 32 bit memory at 0xed800000
[0xed8000ff].
  Bus  0, device  17, function  0:
    ISA bridge: VIA Technologies, Inc. VT8235 ISA
Bridge (rev 0).
  Bus  0, device  17, function  1:
    IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master
IDE (rev 6).
      Master Capable.  Latency=32.  
      I/O at 0xb800 [0xb80f].
  Bus  0, device  17, function  5:
    Multimedia audio controller: VIA Technologies,
Inc. VT8233/A/8235 AC97 Audio Controller (rev 80).
      IRQ 5.
      I/O at 0xe000 [0xe0ff].
  Bus  0, device  19, function  0:
    Ethernet controller: Realtek Semiconductor Co.,
Ltd. RTL-8029(AS) (rev 0).
      IRQ 10.
      I/O at 0xb400 [0xb41f].
  Bus  1, device   0, function  0:
    VGA compatible controller: nVidia Corporation NV11
[GeForce2 MX/MX 400] (rev 161).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=5.Max
Lat=1.
      Non-prefetchable 32 bit memory at 0xee000000
[0xeeffffff].
      Prefetchable 32 bit memory at 0xf0000000
[0xf7ffffff].
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 1110:9021 Analog Devices
Canada, Ltd (Allied Telesyn) 
Bus 003 Device 003: ID 0ab0:0001 Arrow Strong
Electronics Co., Ltd 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
# interruptions' affectation
           CPU0       
  0:      19569          XT-PIC  timer
  1:        297          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:        461          XT-PIC  ehci_hcd, usb-uhci,
usb-uhci, usb-uhci
  8:          1          XT-PIC  rtc
 10:          0          XT-PIC  eth0
 14:       4169          XT-PIC  ide0
 15:          9          XT-PIC  ide1
NMI:          0 
ERR:          0
# module loaded ?        [ OK ]
# modem operational ?    [ KO ]
eagle-usb status display
-------------------------------------------------------------
Driver version 2.3.2     Chipset: Eagle0
Vendor ID : 0x1110     Product ID : 0x9021   Rev:
0x500b
USB Bus : 003    USB Device : 002        Dbg mask: 0x0
Ethernet Interface : none
MAC: 00:60:4c:2b:25:04
Tx Rate           0  Rx Rate           0
FEC               0  Margin            0  Atten       
     0 dB
VID-CPE           0  VID-CO            0  HEC         
     0
VPI               8  VCI              35  Delin       
  GOOD
Cells Tx          0  Cells Rx          0
Pkts Tx           0  Pkts Rx           0
OAM               0  Bad VPI           0  Bad CRC     
     0
Oversiz.          0

Modem is initializing(INITIALIZING)

# Config vpi/vci/encapsulation/isp : 8 23 6 (pppoa)
FR07
# pppd launched ?        [ KO ]
# /etc/resolv.conf should contain the DNS
nameserver 213.36.80.1
nameserver 213.36.80.1
eth0      Link encap:Ethernet  HWaddr
52:54:00:E7:E9:BC  
          inet addr:192.168.0.1  Bcast:192.168.0.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:10 Base address:0xb400 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Kernel IP routing table
Destination     Gateway         Genmask         Flags
Metric Ref    Use Iface
192.168.0.0     0.0.0.0         255.255.255.0   U    
0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U    
0      0        0 lo
# ping IP ?              [ KO ]
# test DNS resolution ?  [ KO ]
##Complete diagnostic has been saved on
/var/log/eagle-usb/eagle_diag_20050627155558.txt
##Please keep only relevant data and remove personal
informations.
==============================================================


merci

--
Seb


        

        
                
___________________________________________________________________________ 
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger 
Téléchargez cette version sur http://fr.messenger.yahoo.com

Reply via email to