HI! I have a problem with my modem under RedHat 9. In yours forum I have
discuss with baud123, this is the url: >
http://forum.eagle-usb.org/viewtopic.php?t=3072&view=next
he had say to write you. Help me, I don't know what I do!
my ISP: Alice (telecom italia)
my /etc/eagle-usb/eagle-usb.conf is:
<eaglectrl>
# Options are set whith the following syntax:
#
# Name = Value
#
# where "Name" is the option name, and
# "Value" is the option value, specified
# in hexadecimal (without any prefix).
# Option names are case sensitive.
# Options that are commented out are specified
# with their default values.
#
# Other than VPI, VCI and Encapsulation,
# I really don't known what these options mean.
#POTS FOR EAGLE
# those values come from file CMVep.txt
OPTN0=0x80008066
OPTN1=0x00000994
OPTN2=0x63600000
OPTN3=0x00000028
OPTN4=0x006c0000
# OPTN5=00000500
# OPTN6=00000000
OPTN7=0x02fb0000
# OPTN15=09090909
OPTN18=0xC20200ff
OPTN19=0x80000000
OPTN20=0x11900002
OPTN70=0x218280aa
OPTN72=0x006f06eb
OPTN73=0x00010060
cw optn 0 0x80008066
cw optn 1 0x00000994
cw optn 2 0x63600000
cw optn 3 0x00000028
cw optn 4 0x006c0000
cw optn 7 0x02fb0000
cw optn 18 0xC20200ff
cw optn 19 0x80000000
cw optn 20 0x11900002
cw optn 70 0x218280aa
cw optn 72 0x006f06eb
cw optn 73 0x00010060
cw mask 8 0x3fffffc0
cw diag 0 0x26870030
cw flag 0 0x00000820
cw cntl 0 2
# not implemented, don't know how to :-(
#cw mask 8 0x3fffffc0
#cw diag 0 0x26870030
#cw flag 0 0x00000820
#;These OPTN 0,18,19 are for non-TR-48
#cw optn 0 0x80020066
#cw optn 18 0x00000000
#cw optn 19 0x00000000
#;These OPTN 0,18,19 are for TR-48
#;cw optn 0 0x80008066
#;cw optn 18 0x820200ff
#;cw optn 19 0x80000000
#CW cntl 0 2
#Enable OPTN16 for WT-062 testing only
#OPTN16=80818040
# VPI / VCI are in hexa (8, 23) is 8,35 in decimal
VPI=00000008
VCI=00000023
#The following values are valid for encapsulation :
#MPOA_MODE_BRIDGED_ETH_LLC ----> 1
#MPOA_MODE_BRIDGED_ETH_VC ----> 2
#MPOA_MODE_ROUTED_IP_LLC ----> 3
#MPOA_MODE_ROUTED_IP_VC ----> 4
#MPOA_MODE_PPPOA_LLC ----> 5
#MPOA_MODE_PPPOA_VC ----> 6
Encapsulation=00000006
Linetype=00000001
RatePollFreq=00000009
</eaglectrl>
During connection, the output of command eaglestat is:
[EMAIL PROTECTED] panzer]# eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.0.0 Chipset: Eagle2
Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
USB Bus : 003 USB Device : 003 Dbg mask: 0x0
Ethernet Interface : eth0
MAC: 00:60:4c:31:03:87
Tx Rate 320 Rx Rate 800
FEC 0 Margin 44 Atten 26 dB
VID-CPE 0 VID-CO 28 HEC 0
VPI 8 VCI 35 Delin GOOD
Cells Tx 2007 Cells Rx 5315
Pkts Tx 758 Pkts Rx 707
OAM 0 Bad VPI 0 Bad CRC 0
Oversiz. 0
Modem is operational
I have update my DSPcode and I have the eagle-usb version 2.0.0
Remember you that when my modem lost connection, in the
var/log/messages, appear these line:
gen 17 11:57:28 localhost gconfd (root-6536): Inizializzazione (versione
2.2.0), pid 6536, utente 'root'
gen 17 11:57:28 localhost gconfd (root-6536): L'indirizzo
"xml:readonly:/etc/gconf/gconf.xml.mandatory" Ú stato risolta ad una fonte di
configurazione in sola lettura in posizione 0
gen 17 11:57:28 localhost gconfd (root-6536): L'indirizzo
"xml:readwrite:/root/.gconf" Ú stato risolto ad una fonte di configurazione
scrivibile in posizione 1
gen 17 11:57:28 localhost gconfd (root-6536): L'indirizzo
"xml:readonly:/etc/gconf/gconf.xml.defaults" Ú stato risolta ad una fonte di
configurazione in sola lettura in posizione 2
Jan 17 11:57:48 localhost kernel: [eagle-usb] Modem operational !!
(I have report line of 11:57:48, beacause at this this time my modem
lost connection and at 11:57:48 automatically reconnect)
Thank you for your help, I wait your response, bye!
