Hi, I rename the thread so that it may be more meaningful... Please remind us which modem *exactly* you have : I suspect it's a fast 800 E2L or E2T (written at the back), can you confirm ?
Furthermore, the gconf messages are not relevant in /var/log/messages. Do those messages appear : 97th threshold reached rebooting SM LOS defect ? You may give a try to eagle-usb-1.9.8 or perhaps 1.9.9.1, just in case... it may work better. You can download it from sourceforge : http://sourceforge.net/project/showfiles.php?group_id=81588&package_id=83540 (do not apply the changes to eagle-usb.conf with those previous versions) ./configure ; make uninstall ; make ; make install ; eagleconfig # to install (and rename /etc/eagle-usb/eagle-usb.conf after make uninstall if it's still there...). Did you ask your ISP to verify your line ? Disconnections can be caused by aerial lines / bad weather (wind...) so it's better to check. @++ Ben'. aka baud123 panzer a dit : > HI! I have a problem with my modem under RedHat 9. In yours forum I have > discuss with baud123, this is the url: > > http://forum.eagle-usb.org/viewtopic.php?t=3072&view=next > he had say to write you. Help me, I don't know what I do! > > my ISP: Alice (telecom italia) > > my /etc/eagle-usb/eagle-usb.conf is: >> <eaglectrl> >> # Options are set whith the following syntax: >> # >> # Name = Value >> # >> # where "Name" is the option name, and >> # "Value" is the option value, specified >> # in hexadecimal (without any prefix). >> # Option names are case sensitive. >> # Options that are commented out are specified >> # with their default values. >> # >> # Other than VPI, VCI and Encapsulation, >> # I really don't known what these options mean. >> >> #POTS FOR EAGLE >> # those values come from file CMVep.txt >> OPTN0=0x80008066 >> OPTN1=0x00000994 >> OPTN2=0x63600000 >> OPTN3=0x00000028 >> OPTN4=0x006c0000 >> # OPTN5=00000500 >> # OPTN6=00000000 >> OPTN7=0x02fb0000 >> # OPTN15=09090909 >> OPTN18=0xC20200ff >> OPTN19=0x80000000 >> OPTN20=0x11900002 >> OPTN70=0x218280aa >> OPTN72=0x006f06eb >> OPTN73=0x00010060 >> cw optn 0 0x80008066 >> cw optn 1 0x00000994 >> cw optn 2 0x63600000 >> cw optn 3 0x00000028 >> cw optn 4 0x006c0000 >> cw optn 7 0x02fb0000 >> cw optn 18 0xC20200ff >> cw optn 19 0x80000000 >> cw optn 20 0x11900002 >> cw optn 70 0x218280aa >> cw optn 72 0x006f06eb >> cw optn 73 0x00010060 >> cw mask 8 0x3fffffc0 >> cw diag 0 0x26870030 >> cw flag 0 0x00000820 >> cw cntl 0 2 >> >> # not implemented, don't know how to :-( >> #cw mask 8 0x3fffffc0 >> #cw diag 0 0x26870030 >> #cw flag 0 0x00000820 >> #;These OPTN 0,18,19 are for non-TR-48 >> #cw optn 0 0x80020066 >> #cw optn 18 0x00000000 >> #cw optn 19 0x00000000 >> #;These OPTN 0,18,19 are for TR-48 >> #;cw optn 0 0x80008066 >> #;cw optn 18 0x820200ff >> #;cw optn 19 0x80000000 >> #CW cntl 0 2 >> #Enable OPTN16 for WT-062 testing only >> #OPTN16=80818040 >> >> # VPI / VCI are in hexa (8, 23) is 8,35 in decimal >> VPI=00000008 >> VCI=00000023 >> >> #The following values are valid for encapsulation : >> #MPOA_MODE_BRIDGED_ETH_LLC ----> 1 >> #MPOA_MODE_BRIDGED_ETH_VC ----> 2 >> #MPOA_MODE_ROUTED_IP_LLC ----> 3 >> #MPOA_MODE_ROUTED_IP_VC ----> 4 >> #MPOA_MODE_PPPOA_LLC ----> 5 >> #MPOA_MODE_PPPOA_VC ----> 6 >> Encapsulation=00000006 >> >> Linetype=00000001 >> RatePollFreq=00000009 >> </eaglectrl> > > During connection, the output of command eaglestat is: >> [EMAIL PROTECTED] panzer]# eaglestat >> eagle-usb status display >> ------------------------------------------------------------- >> Driver version 2.0.0 Chipset: Eagle2 >> Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b >> USB Bus : 003 USB Device : 003 Dbg mask: 0x0 >> Ethernet Interface : eth0 >> MAC: 00:60:4c:31:03:87 >> Tx Rate 320 Rx Rate 800 >> FEC 0 Margin 44 Atten 26 dB >> VID-CPE 0 VID-CO 28 HEC 0 >> VPI 8 VCI 35 Delin GOOD >> Cells Tx 2007 Cells Rx 5315 >> Pkts Tx 758 Pkts Rx 707 >> OAM 0 Bad VPI 0 Bad CRC 0 >> Oversiz. 0 >> >> Modem is operational > > > > > I have update my DSPcode and I have the eagle-usb version 2.0.0 > Remember you that when my modem lost connection, in the > var/log/messages, appear these line: >> gen 17 11:57:28 localhost gconfd (root-6536): Inizializzazione >> (versione 2.2.0), pid 6536, utente 'root' gen 17 11:57:28 localhost >> gconfd (root-6536): L'indirizzo >> "xml:readonly:/etc/gconf/gconf.xml.mandatory" Ã stato risolta ad una >> fonte di configurazione in sola lettura in posizione 0 gen 17 11:57:28 >> localhost gconfd (root-6536): L'indirizzo "xml:readwrite:/root/.gconf" >> Ã stato risolto ad una fonte di configurazione scrivibile in >> posizione 1 gen 17 11:57:28 localhost gconfd (root-6536): L'indirizzo >> "xml:readonly:/etc/gconf/gconf.xml.defaults" Ã stato risolta ad una >> fonte di configurazione in sola lettura in posizione 2 Jan 17 11:57:48 >> localhost kernel: [eagle-usb] Modem operational !! > (I have report line of 11:57:48, beacause at this this time my modem > lost connection and at 11:57:48 automatically reconnect) > > Thank you for your help, I wait your response, bye!
