----- Original Message ----- From: "Benoit Audouard" <[EMAIL PROTECTED]> To: <[email protected]> Cc: <[EMAIL PROTECTED]> Sent: Wednesday, October 27, 2004 2:03 AM Subject: [Eagleusb-dev] snapshot 20041026 for tests
> Hi, > new version including latest BNM > http://baud123.free.fr/eagle-usb/eagle-usb-2.0.0/eagle-usb-2.0.0_20041026_snapshot.tar.bz2 > - CMV files are not (yet) copied automatically. > - still uses (by default) eagle-usb.conf... > - for testing (regression mostly on "older" modems...) > => works for me, fast800E3, no reproducible Oops on Mdk10.1 > kernel-2.6.8.1-12mdk > > Are the proposals, made before for implementation of CMV, correct (last > suggestion by Gesp) ? > Ok for cmvep.txt but for cmvei.txt, win2.031 is ; ISDN for EAGLE ; Number of CMV writes made in this file MUST not exceed 16 ; version DTAG pour 40e4be96 CW cntl 0 1 CW optn 0 80000066 CW optn 2 23600000 CW optn 3 00003028 CW optn 4 00000001 CW optn 5 00000500 CW optn 8 C0000000 CW optn 15 09090909 CW optn 18 82602180 CW optn 20 00020038 CW optn 21 FFFFFE2F CW optn 22 020600c0 CW info 9 0400000A CW info 21 5341 CW info 22 474D0000 CW cntl 0 2 ;For Bridge ONLY CW DIAG 0 23870030 ;For Bridge ONLY CW FLAG 0 00000820 I think you should keep DTAG label for POTS as CMV look narrowly depend to bnm. In futur version, it would be good if a crc identify the dsp_code loaded and display the value found. This help to prevent a corrupted file and detect new update when the crc is unknow. One thing to ask to ADI : Should really diag 0 and flag 0 to be set like this in bridged mode and isdn and with whhat effect? > Here's a proposed plan for release (after testing/corrections) : > release 1- 2nd November (evening) 2.0.0 official release with BNM from > 2.0.31 sagem driver => works for all modems and in all countries with > same parameters (to be confirmed ?) There is some sync problem sometime with 1.9.9 (and non-TR48 optn). It may be with E2L but unsure. I don't know if it will solved by the fix on strol. We should in the futur display the Rev number of a modem to have better feedback. This will help to detect slight hardware change. lsusb don't display Rev in eaglediag. There is too actually a know problem with rejected optn from eagle-usb.conf (and bad side effect with optn1) So I think that using cmve(x).txt files already work better than optn read from eagle-usb.conf and should be prefered. Gilles
