Did the STRPCCMD succeed? If so what version of client access and OS400 are you on?
--- In [email protected], "Stoicescu, Adriana" <[EMAIL PROTECTED]> wrote: > > I have started the Client Access/400 Organizer using STRPCO, then used > STRPCCMD to run a command, but I get the error > > 'Required PC program (PCO.EXE) is not active > > No communications with PC can occur.' > > Any help is appreciated. > > > > Adriana Stoicescu > > _____ > > > -------------------------------------------------------------------- ----------------- > Email Confidentiality Notice and Disclaimer > > This email message contains information which may be confidential and > or legally privileged. Unless you are the intended recipient (or have > been authorised to receive on behalf of the intended recipient), you > may not use, copy or disclose to anyone the message or any information > contained in the message or from any attachments that were sent with > this email. If you have received this email message in error, please > advise the sender by email, and delete the message. > > All business and transactions of whatsoever nature be it as agent or > as principal with any party whatsoever shall solely be conducted in > accordance with our Standard Trading Conditions. These conditions have > clauses that may limit our liability. A copy of our Standard Terms is > available on request. When an air waybill or bill of lading or any > other international consignment note is issued, the conditions that > apply for such a document will be in addition to our Standard Trading > Conditions, and for the relative air or sea or other mode of transport > leg / movement only, they will be paramount. > -------------------------------------------------------------------- ----------------- > ------------------------ Yahoo! Groups Sponsor --------------------~--> Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life. http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/wbFolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Easy400Group/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
