PS: I put the easyconfigs here: https://gist.github.com/andreas-h/9a0b3fc50fd1445fecb6ece8cd367a83
HTH, Andreas Andreas Hilboll writes: > Hi Exequiel, > > I did this some months ago; it is possible to get somewhere with > specifying the 'components'. (However, now that I think about it, I'm > not sure if I needed to tweak the easyblock for this.) > > The installations took up this much space: > > $ du -sh icc/2016.2.181-GCC-4.9.3-2.25 ifort/2016.2.181-GCC-4.9.3-2.25 > impi/5.1.3.181-iccifort-2016.2.181-GCC-4.9.3-2.25 > imkl/11.3.2.181-iimpi-2016.02-GCC-4.9.3-2.25 > 559M icc/2016.2.181-GCC-4.9.3-2.25 > 550M ifort/2016.2.181-GCC-4.9.3-2.25 > 764M impi/5.1.3.181-iccifort-2016.2.181-GCC-4.9.3-2.25 > 2.7G imkl/11.3.2.181-iimpi-2016.02-GCC-4.9.3-2.25 > > This is comparable to our new system, where I was able to install the > intel toolchain from the individual source files: > > $ du -sh icc/2016.1.150-GCC-4.9.3-2.25/ ifort/2016.1.150-GCC-4.9.3-2.25/ > impi/5.1.2.150-iccifort-2016.1.150-GCC-4.9.3-2.25/ > imkl/11.3.1.150-iimpi-8.1.5-GCC-4.9.3-2.25/ > 563M icc/2016.1.150-GCC-4.9.3-2.25/ > 493M ifort/2016.1.150-GCC-4.9.3-2.25/ > 817M impi/5.1.2.150-iccifort-2016.1.150-GCC-4.9.3-2.25/ > 2.8G imkl/11.3.1.150-iimpi-8.1.5-GCC-4.9.3-2.25/ > > Cheers, > Andreas. > > > Exequiel SepĂșlveda writes: > >> Hi everyone! >> >> Starting this 2017 with installing Intel 2017 :-) >> >> I have two questions if there is someone willing to answer them. >> >> 1.- Why are GCC and binutils needed on the easyconfigure file >> intel-2017.00.eb >> 2.- Because I have only a big tar.gz file with Intel Cluster Edition, how >> could I separate the required parts to use easyconfigs file for icc, ifort, >> imkl, etc. >> >> Cheers and a great 2017! -- Dr. Andreas Hilboll Center for Marine Environmental Sciences (MARUM) - AND - Institute of Environmental Physics (IUP) University of Bremen NW1 / S3132 Otto-Hahn-Allee 1 D-28359 Bremen Germany +49(0)421 218 62133 (phone) +49(0)421 218 98 62133 (fax) http://www.iup.uni-bremen.de/~hilboll