Am Dienstag, 7. November 2006 18:29 schrieb Andrew Lunn: > On Tue, Nov 07, 2006 at 06:19:17PM +0100, Manfred Gruber wrote: > > Hi ! > > > > I have 2 flash chips on redboot: > > RAM: 0x00000000-0x02000000, [0x000439c8-0x01fdd000] available > > FLASH: 0xf0000000 - 0xf1ffffff 256 x 0x20000 blocks > > FLASH: 0xf2000000 - 0xf3ffffff 256 x 0x20000 blocks > > > > Is there is now a solution to concate two flashes? > > In this case yes. The two flashes are contiguous. So you don't need to > use the flash_v2 branch. You just need to configure the v1 driver so > that it knows there are two flash chips in sequence and it will appear > as just one block.
Hi Andrew ! The Problem is that for other boards where i have 16/32/64/128 MB Flash types on 32 Bit Databus flash_v2 is very fine, and helped me a lot to save some time to always make different bootloaders. So I want or have to be flash_v2, on flash_v2 is no easy solution to bring the config to the secund chip ? thanks regards, manfred -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
