Hi, I added the ecos list to the CC so that everyone can share. I actually used the at91sam7se256 target (or maybe it was sam7s) to get things up and running. I just wrote a flash driver to use the second flash bank.
One thing you might want to try if you're using the graphical config tool is to clean things out between builds. It takes a long time at first, but it can prevent problems that can take up a lot more time. I found ecos builds differently depending on the order in which you select the options. Depending on which email of mine you read, it could be an unrelated issue. I didn't have the right hardware on the board for the pll, so I was getting all kinds of awesome problems. (I'm strictly software, and this was my first embedded project so don't laugh that hard.) I can't be much more help than that with the info you gave, since I didn't use redboot at all. If you can reply-all with a little more detail on this problem, I'm sure someone can help. > -----Original Message----- > From: [email protected] [mailto:[email protected]] > Sent: Wednesday, January 21, 2009 7:03 AM > To: Davies, Greg > Subject: Help on at91sam7se512 > > Hi Davies > > I am having same kind of troubles while trying to get Ecos working on > at91sam7se512. > Except for Redboot.bin, I am unable to execute any of the examples, > even a Hello World. > > There seems to be no specific Target for at91sam7se512 in Ecosconfig. > Have you been able to fix the issues? Can you help me with this ? > > regards > > Nataraj S Narayan > India > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
