Hi, If I remember correctly, it should be possible to get Ecos working using the at91sam7s targets. Afterall, the at91sam7se is basically the same architecture with an external bus added. I don't recall all details, since it has been a while since I played with it. If I recall, there are some peripheral pins that differ, but I thought there has been someone issuing a patch for that some time ago, check the latest CVS and the mailing list.
Tom On Wed, Jan 21, 2009 at 9:22 PM, Davies, Greg <[email protected]> wrote: > Hi, I added the ecos list to the CC so that everyone can > share. I actually used the at91sam7se256 target (or maybe it > was sam7s) to get things up and running. I just wrote a flash > driver to use the second flash bank. > > One thing you might want to try if you're using the graphical > config tool is to clean things out between builds. It takes a > long time at first, but it can prevent problems that can take > up a lot more time. I found ecos builds differently depending > on the order in which you select the options. > > Depending on which email of mine you read, it could be an > unrelated issue. I didn't have the right hardware on the > board for the pll, so I was getting all kinds of awesome > problems. (I'm strictly software, and this was my first > embedded project so don't laugh that hard.) > > I can't be much more help than that with the info you gave, > since I didn't use redboot at all. If you can reply-all with > a little more detail on this problem, I'm sure someone can help. > >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] >> Sent: Wednesday, January 21, 2009 7:03 AM >> To: Davies, Greg >> Subject: Help on at91sam7se512 >> >> Hi Davies >> >> I am having same kind of troubles while trying to get Ecos > working on >> at91sam7se512. >> Except for Redboot.bin, I am unable to execute any of the examples, >> even a Hello World. >> >> There seems to be no specific Target for at91sam7se512 in > Ecosconfig. >> Have you been able to fix the issues? Can you help me with this ? >> >> regards >> >> Nataraj S Narayan >> India >> >> > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
