Please do not reply to this email, use the link below. http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001219
Jerzy Dyrda <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #2036|0 |1 is obsolete| | --- Comment #55 from Jerzy Dyrda <[email protected]> --- Created attachment 2093 --> http://bugs.ecos.sourceware.org/attachment.cgi?id=2093&action=edit Eth driver for STM32 family. Hello Ilija, (In reply to comment #54) > (In reply to comment #53) > > Created attachment 2036 [details] > > Eth driver for STM32 family. > > > > Hello Ilija, > > > > (In reply to comment #51) > > > Created an attachment (id=2027) [details] > > > TCP/IP checksum CDL fix 130115 (Incremental to attachment 2013 [details]) > > > > > > There is a bug in IP/TCP/UDP checksum generation/checking CDL. The > > > attached > > > patch should fix. Check if it works for your target. > > Ups. Now should be better and I hope that it's last issue to fix. > > There's more. Have you tested with hardware checksum enabled? It doesn't > work on my target. Problem are the same macros, only in C source. > > So check for other similar issues, than fix and than test, test and test. > Until you are sure that it works with both hw and sw checksum. > Then test again before you post the patch. > And for the end, don't forget to test. Yes. You are absolutely right but my wiling to test becomes lower and lower during so long time. I hope that we are finalizing release of driver. Best regards, jerzy -- You are receiving this mail because: You are on the CC list for the bug.
