Hi, Uefi specification guys.
I am reading Uefi specification and occasionally am finding some
obvious mistypings, which may confuse implemeters (or cause errors),
so I thought it would be not redundant to inform you about this.
This time it's almost nothing, but still, it would be ok to fix this.
(the specs are 2.4, 2.6. The numeration of tables given as to the
2.4.Errata.B version.):
Section 9, Device Path Protocol, table 40, defines the field Type for
End Of Hardware type as 0x7f, but in the examples of device paths, it
is mistyped as 0xff, namely in:
Table 54. Fibre Channel Ex Device Path Example,
Table 58. USB Device Path Examples,
Table 59. Another USB Device Path Example,
Table 74. IPv4 configuration,
Table 75. IPv6 configuration
It's obviously confused with End Entire Device Path Subtype (0xff) for
this type of device node.
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel