Thanks for finding that. I'll take those items (which are clearly bugs) and post it within the UEFI workgroup as a pending errata.
Thanks, Mike Rothman (迈克 罗斯曼 / माइकल रोथ्मेन् / Михаил Ротман / משה רוטמן) רועה עיקרי של חתולים -----Original Message----- From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf Of valerij zaporogeci Sent: Wednesday, June 8, 2016 11:03 AM To: edk2-devel <edk2-devel@lists.01.org> Subject: [edk2] The specification mistypings. Hi, Uefi specification guys. I am reading Uefi specification and occasionally am finding some obvious mistypings, which may confuse implemeters (or cause errors), so I thought it would be not redundant to inform you about this. This time it's almost nothing, but still, it would be ok to fix this. (the specs are 2.4, 2.6. The numeration of tables given as to the 2.4.Errata.B version.): Section 9, Device Path Protocol, table 40, defines the field Type for End Of Hardware type as 0x7f, but in the examples of device paths, it is mistyped as 0xff, namely in: Table 54. Fibre Channel Ex Device Path Example, Table 58. USB Device Path Examples, Table 59. Another USB Device Path Example, Table 74. IPv4 configuration, Table 75. IPv6 configuration It's obviously confused with End Entire Device Path Subtype (0xff) for this type of device node. _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
