Laszlo: Thanks for your report. I verify the same command in windows OS with VS2015x86. It can pass. But, it fail in Linux OS with GCC5 tool chain. We will check it.
Thanks Liming >-----Original Message----- >From: Laszlo Ersek [mailto:ler...@redhat.com] >Sent: Monday, December 31, 2018 8:16 AM >To: Gao, Liming <liming....@intel.com>; Gary Lin <g...@suse.com> >Cc: edk2-devel@lists.01.org; Kinney, Michael D <michael.d.kin...@intel.com> >Subject: Re: [edk2] [RFC] Edk2 BaseTools Python3 Migration Update > >On 12/29/18 07:07, Gao, Liming wrote: >> Lin: >> Thanks for your verification. This issue has been fixed in the >> latest version of https://github.com/lgao4/edk2/tree/Python3. Could >> you try again? > >At commit 4614985ec223 ("BaseTools:The binary data type is incorrect", >2018-12-29): > > >(1) I tried to build OVMF as follows (using >python-2.7.5-69.el7_5.x86_64): > > build \ > -a IA32 \ > -p OvmfPkg/OvmfPkgIa32.dsc \ > -D SMM_REQUIRE \ > -D SECURE_BOOT_ENABLE \ > -D TLS_ENABLE \ > -D NETWORK_IP6_ENABLE \ > -t GCC48 \ > -n 4 \ > --report-file=/tmp/build.ovmf.32.report \ > --log=/tmp/build.ovmf.32.log \ > -b NOOPT \ > -D HTTP_BOOT_ENABLE \ > --cmd-len=65536 \ > --hash \ > --genfds-multi-thread > >This produced messages like: > >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/FVMAIN_COMPACT.Fv.txt(...): >warning: Fail to read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/PEIFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/DXEFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/SECFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/FVMAIN_COMPACT.Fv.txt(...): >warning: Fail to read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/PEIFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/DXEFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/SECFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/PEIFV.Fv.txt(...): warning: Fail to >read report file >> BuildReport.py... >> .../Build/OvmfIa32/NOOPT_GCC48/FV/DXEFV.Fv.txt(...): warning: Fail to >read report file > >near the end of the build. > > >(2) After I removed the "--report-file" switch, the warnings >disappeared. > >However, neither of the expected output files > >- Build/OvmfIa32/NOOPT_GCC48/FV/OVMF.fd >- Build/OvmfIa32/NOOPT_GCC48/FV/OVMF_CODE.fd > >existed. To be more precise, none of "OVMF.fd" and "OVMF_CODE.fd" >existed anywhere in the "Build" directory. > >Judged from the build log, it seemed that at least some *.efi modules >were compiled and linked, but FVs and FDs were not built. The following >sections of the log were missing: > >> Fd File Name:OVMF_VARS >(.../Build/OvmfIa32/NOOPT_GCC48/FV/OVMF_VARS.fd) >> >> Generate Region at Offset 0x0 >> Region Size = 0x40000 >> Region Name = DATA >> >> Generate Region at Offset 0x40000 >> Region Size = 0x1000 >> Region Name = None >> >> Generate Region at Offset 0x41000 >> Region Size = 0x1000 >> Region Name = DATA >> >> Generate Region at Offset 0x42000 >> Region Size = 0x42000 >> Region Name = None >> >> Fd File Name:MEMFD (.../Build/OvmfIa32/NOOPT_GCC48/FV/MEMFD.fd) >> >> Generate Region at Offset 0x0 >> Region Size = 0x6000 >> Region Name = None >> >> Generate Region at Offset 0x6000 >> Region Size = 0x1000 >> Region Name = None >> >> Generate Region at Offset 0x7000 >> Region Size = 0x1000 >> Region Name = None >> Padding region starting from offset 0x8000, with size 0x8000 >> >> Generate Region at Offset 0x8000 >> Region Size = 0x8000 >> Region Name = None >> >> Generate Region at Offset 0x10000 >> Region Size = 0x10000 >> Region Name = None >> >> Generate Region at Offset 0x20000 >> Region Size = 0xE0000 >> Region Name = FV >> >> Generating PEIFV FV >> >> Generate Region at Offset 0x100000 >> Region Size = 0xB00000 >> Region Name = FV >> >> Generating DXEFV FV >> >> Fd File Name:OVMF (.../Build/OvmfIa32/NOOPT_GCC48/FV/OVMF.fd) >> >> Generate Region at Offset 0x0 >> Region Size = 0x40000 >> Region Name = DATA >> >> Generate Region at Offset 0x40000 >> Region Size = 0x1000 >> Region Name = None >> >> Generate Region at Offset 0x41000 >> Region Size = 0x1000 >> Region Name = DATA >> >> Generate Region at Offset 0x42000 >> Region Size = 0x42000 >> Region Name = None >> >> Generate Region at Offset 0x84000 >> Region Size = 0x348000 >> Region Name = FV >> >> Generating FVMAIN_COMPACT FV >> >> Generate Region at Offset 0x3CC000 >> Region Size = 0x34000 >> Region Name = FV >> >> Generating SECFV FV >> >> Fd File Name:OVMF_CODE >(.../Build/OvmfIa32/NOOPT_GCC48/FV/OVMF_CODE.fd) >> >> Generate Region at Offset 0x0 >> Region Size = 0x348000 >> Region Name = FV >> >> Generate Region at Offset 0x348000 >> Region Size = 0x34000 >> Region Name = FV > >and > >> FV Space Information >> SECFV [19%Full] 212992 total, 42208 used, 170784 free >> FVMAIN_COMPACT [52%Full] 3440640 total, 1820408 used, 1620232 free >> DXEFV [86%Full] 11534336 total, 9928672 used, 1605664 free >> PEIFV [43%Full] 917504 total, 395944 used, 521560 free >> Build report can be found at .../build.ovmf.32.report > >Interestingly, the line > >> GUID cross reference file can be found >at .../Build/OvmfIa32/NOOPT_GCC48/FV/Guid.xref > >which is normally printed between the two listings above, was still >printed, but alone. > >Thanks, >Laszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel