Jay, this is a very interesting story. I too did some work with welding many years ago. (Were you studying MIG or TIG?)
I think my current situation does, in fact, have some things in common with the situation you describe. The discussions on this group have been very helpful. I'm going to continue working and I will report back at a later date regarding the progress I make or any obstacles I encounter. Thanks to everyone who replied to my post! "Jay Warner" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Perhaps your data is of the form which I observed some years ago. > > We were looking at the effect of moisture in a gas (fuel) feed on the porosity > in a weld. Lots of water in the gas means lots of pores, or holes, in the weld > area. Not a good plan for strong welds. > [snip] . . ================================================================= Instructions for joining and leaving this list, remarks about the problem of INAPPROPRIATE MESSAGES, and archives are available at: . http://jse.stat.ncsu.edu/ . =================================================================
