Hello, The current environment I am working in requires an Infrastructure setup of Edubuntu 7.10. I have taken a look at both of these guides -
http://doc.ubuntu.com/edubuntu/edubuntu/handbook/C/multiple-server-setup.html and https://wiki.edubuntu.org/EdubuntuDHCPload-balancingFailover to get me started. I specifically began with the second guide, and wanted to test with a stand alone box. However, I ran into some interesting problems. 1) The standalone box upon final installation did not recognize eth0 for dhcpd, and I had to edit the entry in /etc/default/dhcpd 2) I had to add completely re-install ltsp-standalone-server 3) Create/copy over a sample dhcp.conf into /etc/ltsp This then got me to boot my first client. I am not sure this the typical behavior one would/should expect on trying to install the standalone? Can someone first verify whether I went through the steps to install the standalone properly? 6) In re-editing the dhcp.conf file in /etc/ltsp I added failover peer "dhcp" { primary; address 10.0.14.253; port 519; peer address 10.0.15.253; peer port 520; max-response-delay 30; max-unacked-updates 10; mclt 3600; split 128; load balance max seconds 3; } along with the other directives as shown in the above guide. However, my client no longer booted, and I basically stopped there. (I didnt bother to configure the second dhcp-server) Can someone help/verify the whether the instructions in the wiki guide work on edubuntu 7.10? Thanks, Akash Chandrashekar -- edubuntu-devel mailing list edubuntu-devel@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-devel
