Hi Akash,

My edubuntu 7.10 didn't server wasn't started by default. As I
remember I had to make changes to /etc/ltsp/dhcpd.conf which is where
the dhcp daemon is configured for ltsp.

By the way your subject doesn't refer to the problem you're having so
you may wish to re-edit it and send it again.

hth,

John


On Wed, Feb 13, 2008 at 12:04 AM,  <[EMAIL PROTECTED]> wrote:
> Hello,
>
>  The current environment I am working in requires an Infrastructure
>  setup of Edubuntu 7.10. I have taken a look at both of these guides -
>
>  http://doc.ubuntu.com/edubuntu/edubuntu/handbook/C/multiple-server-setup.html
>
>  and
>
>  https://wiki.edubuntu.org/EdubuntuDHCPload-balancingFailover
>
>  to get me started. I specifically began with the second guide, and
>  wanted to test with a stand alone box. However, I ran into some
>  interesting problems.
>
>  1) The standalone box upon final installation did not recognize eth0
>  for dhcpd, and I had to edit the entry in /etc/default/dhcpd
>
>  2) I had to add completely re-install ltsp-standalone-server
>
>  3) Create/copy over a sample dhcp.conf into /etc/ltsp
>
>  This then got me to boot my first client. I am not sure this the
>  typical behavior one would/should expect on trying to install the
>  standalone?
>  Can someone first verify whether I went through the steps to install
>  the standalone properly?
>
>  6) In re-editing the dhcp.conf file in /etc/ltsp
>
>  I added
>
>   failover peer "dhcp" {
>         primary;
>         address 10.0.14.253;
>         port 519;
>         peer address 10.0.15.253;
>         peer port 520;
>         max-response-delay 30;
>         max-unacked-updates 10;
>         mclt 3600;
>         split 128;
>         load balance max seconds 3;
>  }
>
>
>  along with the other directives as shown in the above guide. However,
>  my client no longer booted, and I basically stopped there. (I didnt
>  bother to configure the second dhcp-server)
>
>  Can someone help/verify the whether the instructions in the wiki guide
>  work on edubuntu 7.10?
>
>  Thanks, Akash Chandrashekar
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>  --
>  edubuntu-devel mailing list
>  edubuntu-devel@lists.ubuntu.com
>  Modify settings or unsubscribe at: 
> https://lists.ubuntu.com/mailman/listinfo/edubuntu-devel
>

-- 
edubuntu-devel mailing list
edubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/edubuntu-devel

Reply via email to