My experience with 2.2rc1 is simply way to many issues to use in any
production environment.

I did try 2.1.x I ran an asterisk box behind Endian running an IAX2
trunk through it without too many hassles for a while as a test, worked
ok, did have to restart Endian once in a while, not sure if the problem
was really Endian or my Asterisk box though.

Steve


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
Knisely
Sent: 03 July 2008 02:55 AM
To: [email protected]
Subject: RE: [Efw-user] Endian 2.2rc1 and SIP


Does anyone contribute to this list or just complaint about release
dates?

I'd love to troubleshoot this issue... perhaps even help get it resolved
in the eminent release 2.2rc2.

As I see it, the issue did not exist in 1.8.  I skipped 2.1.x because of
issues with port forwarding and AV updating, so I can not comment on if
the issue is in that release.  

I'm seeing nothing in the SIP proxy logs... so I'm thinking that the
issue may be there somewhere; though, the issue persists even when the
proxy is disabled.

I find it difficult to believe that I am the only person needing to run
a SIP device behind Endian.  Can anyone else chime in on this with some
experience or a perspective?

M Knisely

-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Mike  Knisely
Sent: Wed 7/2/2008 08:32
To: [email protected]
Subject: [Efw-user] Endian 2.2rc1 and SIP
 

I am using a VoIP service that does not support BYOD.  I have been using
this service for a while with Endian 1.8 w/out issue; however, once I
moved to 2.2rc1 I am unable to get audio into my SIP device.  Audio out
works fine.

I've attempted port forwarding the ports used for the RTP stream, SIP
ports, etc.  No luck.

I have also attempted to do a 1:1 NAT and it still does not function
properly.

I enabled the SIP proxy with no change.  I ran siproxyd from the command
line to see if I could get some debug output.  I edited the
/etc/siproxyd.conf file to trigger some messages.  I was unable to get
any debug output.

Does anyone else have any suggestions regarding this?  Anyone else
experiencing this issue?  I'm at a loss.

M. Knisely


-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user

Reply via email to