Hello yuan,
your IP at your PC 202.137.5. 73, this is not the same subnet of bri0/eth0,
your inside interface.
Install endian only with one eth (your inside eth) activated, so thats your
inisde interface.
After that, install/configure your outside interface.
Thats the way it worked with my setup. I faced the same problem.
yours,
Alex
----- original Nachricht --------
Betreff: [Efw-user] I need advice on this setup
Gesendet: Do, 09. Okt 2008
Von: yuan yudistira
Hi
I have tried to install and place endian firewall between internet and my
network.
The result : users can not access internet.
I try to trace route from users PC, it reach the endian box, but packet never
get out of it.
I try to ping DNS IP fom command line (inside endian box),
I got this error :
[EMAIL PROTECTED]:~ # ping 202.137.3.111
PING 202.137.3.111 (202.137.3.110) 56(84) bytes of data.
>From 202.137.5.173 icmp_seq=10 Destination Host Unreachable
From 202.137.5.173 icmp_seq=13 Destination Host Unreachable
202.137.5.173 is red interface.
I think i setup net mask and default gateway for red is correct.
default gateway 202.137.5.174 (ISP)
Here is result from ifconfig :
[EMAIL PROTECTED]:~ # ifconfig
br0 Link encap:Ethernet HWaddr 00:13:F7:D1:CF:6E
inet addr:202.137.6.99 Bcast:202.137.6.103 Mask:255.255.255.248
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7272 errors:0 dropped:0 overruns:0 frame:0
TX packets:1106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:488434 (476.9 KiB) TX bytes:227213 (221.8 KiB)
eth0 Link encap:Ethernet HWaddr 00:13:F7:D1:CF:6E
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:7430 errors:0 dropped:0 overruns:0 frame:0
TX packets:1102 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:607823 (593.5 KiB) TX bytes:227331 (222.0 KiB)
Interrupt:16 Base address:0x8800
eth1 Link encap:Ethernet HWaddr 00:13:F7:D1:D0:9A
inet addr:202.137.5.173 Bcast:202.137.5.175 Mask:255.255.255.252
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:333 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:19980 (19.5 KiB)
Interrupt:18 Base address:0xac00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:663 errors:0 dropped:0 overruns:0 frame:0
TX packets:663 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:54298 (53.0 KiB) TX bytes:54298 (53.0 KiB)
Anyone here can give me advice on how to make it work?
Thanks
YUAN
--- original Nachricht Ende ----
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
