Hi

I am really sorry. I might missed on that one.

Yes, I try to replace the MIOL router.
MIOL router is actually cisco router seri 3600

and JASN-01-RO-02 is also cisco router .

I am really confuse to place this endian PC.

My main goal is to use endian to stop or lower down spam coming in and out
and also
to manage user access to internet.

Please guide me ...

Thanks in advance



YUAN


On Thu, Oct 9, 2008 at 7:43 PM, compdoc <[EMAIL PROTECTED]> wrote:

>  You decided to replace the MIOL router with the efw? You never answered
> my questions before – what brand is the MIOL router? Is it a simple router,
> or does it support v-lans, etc as your other equipment does?
>
>
>
>
>
>
>
> *From:* yuan yudistira [mailto:[EMAIL PROTECTED]
> *Sent:* Thursday, October 09, 2008 5:18 AM
> *To:* [email protected]
> *Subject:* Re: [Efw-user] I need advice on this setup
>
>
>
> Hi
>
> Thanks for your reply.
>
> Does it means that I have to setup
> red interface in eth0 ? not eth1?
>
> I am sorry, but I don't understand by "install endian only with one eth" ?
> Does it mean that I have to unplug the cable?
>
> In My case, what to do to fix the problem?
>
>
> Again thank you!
>
>
>
> YUAN
>
>  On Thu, Oct 9, 2008 at 4:58 PM, Alexander Grötsch <[EMAIL PROTECTED]>
> wrote:
>
>
> Hello yuan,
> your IP at your PC 202.137.5. 73, this is not the same subnet of
> bri0/eth0, your inside interface.
> Install endian only with one eth (your inside eth) activated, so thats your
> inisde interface.
> After that, install/configure your outside interface.
> Thats the way it worked with my setup. I faced the same problem.
> yours,
> Alex
>
> ----- original Nachricht --------
>
> Betreff: [Efw-user] I need advice on this setup
> Gesendet: Do, 09. Okt 2008
> Von: yuan yudistira
>
>
>
> Hi
>
> I have tried to install and place endian firewall between internet and my
> network.
>
> The result : users can not access internet.
>
> I try to trace route from users PC, it reach the endian box, but packet
> never get out of it.
>
> I try to ping DNS IP fom command line (inside endian box),
>
> I got this error :
>
> [EMAIL PROTECTED]:~ # ping 202.137.3.111
> PING 202.137.3.111 (202.137.3.110) 56(84) bytes of data.
> >From 202.137.5.173 icmp_seq=10 Destination Host Unreachable
> >From 202.137.5.173 icmp_seq=13 Destination Host Unreachable
>
>
>
> 202.137.5.173 is red interface.
>
> I think i setup net mask and default gateway for red is correct.
> default gateway 202.137.5.174 (ISP)
>
>
> Here is result from ifconfig :
> [EMAIL PROTECTED]:~ # ifconfig
> br0       Link encap:Ethernet  HWaddr 00:13:F7:D1:CF:6E
>          inet addr:202.137.6.99  Bcast:202.137.6.103  Mask:255.255.255.248
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:7272 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:1106 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:0
>          RX bytes:488434 (476.9 KiB)  TX bytes:227213 (221.8 KiB)
>
> eth0      Link encap:Ethernet  HWaddr 00:13:F7:D1:CF:6E
>          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
>          RX packets:7430 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:1102 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:607823 (593.5 KiB)  TX bytes:227331 (222.0 KiB)
>          Interrupt:16 Base address:0x8800
>
> eth1      Link encap:Ethernet  HWaddr 00:13:F7:D1:D0:9A
>          inet addr:202.137.5.173  Bcast:202.137.5.175  Mask:
> 255.255.255.252
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:333 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:0 (0.0 b)  TX bytes:19980 (19.5 KiB)
>          Interrupt:18 Base address:0xac00
>
> lo        Link encap:Local Loopback
>          inet addr:127.0.0.1  Mask:255.0.0.0
>          UP LOOPBACK RUNNING  MTU:16436  Metric:1
>          RX packets:663 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:663 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:0
>          RX bytes:54298 (53.0 KiB)  TX bytes:54298 (53.0 KiB)
>
>
>
> Anyone here can give me advice on how to make it work?
>
>
> Thanks
>
>
>
> YUAN
>
>
>
>
>
>
>   --- original Nachricht Ende ----
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Efw-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/efw-user
>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Efw-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/efw-user
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user

Reply via email to