Hi This is a repeat of a message I have posted on efwsupport.com forum http://efwsupport.com/index.php?topic=1830.msg4834#msg4834
Can anybody suggest where I can locate the missing kernel module(s)? part1 ==== Very slow disk IO on SATA RAID1 Jetway NC92-330-LF I have installed endian on a Jetway NC92-330-LF MB with two SATA HDD in software RAID1 Apart from the install being very slow, after installation I am seeing extremely slow IO on the hard disks. hdparm -tT /dev/hda /dev/hda: Timing cached reads: 2392 MB in 2.00 seconds = 1195.39 MB/sec Timing buffered disk reads: 10 MB in 3.08 seconds = 3.25 MB/sec I was also surprised to see the disks using device hdX and not sdX! Am I missing something here or does endian CE not fully support SATA? part2 === Just a follow up on my problems with 2.4 IO speed I installed 2.3 on the same machine with no speed poblems at all hdparm was showing 100MB/s Buffered read speed. I also note that 2.3 was using kernel module libata and ata_piix as well as some scsi modules. libata is NOT present on my copy of endian CF 2.4 Can anybody suggest where I can get additional kernel modules? Further follow-up ============ I have upgraded using efw-upgrade and the system has reverted to being very slow!! The disk devices are now showing as hda and hdb instead of sda and sdb (I guess having raid 1 md devices allows it to boot) kernel mosule ata_piix is loaded but no sign of libata. This looks to me similar to the problem found at: h**p://bugs.endian.com/view.php?id=208 ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
