Bill,
Not a menu problem. Check the soldering at FP U3 pin 16 as well as all
of U2 and RP1.
What does work? That info will assist in properly diagnosing the problem.
73,
Don W3FPR
On 8/7/2024 2:23 AM, William Santos via Elecraft wrote:
My K2 (SN 04507) with K100, SSB module, etc. seems to have a problem with the
keypad.
I cannot activate the filters (XFIL), switch from A to B, or get out of PRE
(PRE/ATT). The MODE(1) key works, but the other 8 keys (2-9) don't seem to have
any effect when pressed.
Does this sound like a hardware problem, or am I in some strange menu setting
that is disabling the keys? (I apologize in advance, as this is a new radio to
me, and this could easily be user error.)
Thanks and 73,
Bill
KN6UDK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
