I've used this same combination for a little over a year now and it works beautifully, especially with the Ameritron QSK-5 pin diode T/R switch! I drive the ALS-600 to full output without throttling back the K2/100 at all with no adverse effects.
Doug W6JD ----- Original Message ----- From: "Donald Nesbitt" <[EMAIL PROTECTED]> To: "Forrest Myers" <[EMAIL PROTECTED]>; "Elecraft" <elecraft@mailman.qth.net> Sent: Wednesday, August 04, 2004 6:20 AM Subject: Re: [Elecraft] K2/100 into an Ameritron ALS-600 amp. > Hello Forrest. The K2/100 to the ALS-600 is a great combination. I ran the > ALS-600 with K2/100 for quite a while and then gave up the ALS-600 to my > brother who had been eyeballing it from the time I got it! It does a great > job for him as well. > > I don't have an answer for you re: ALC from the ALS-600 to the K2. I don't > know an acceptable way to put "external" ALC into the K2 - so I'm no help in > that area. I always just ran mine by either cranking down the power control > on the K2 or leaving it up and running commensurately higher power out of > the ALS-600. I might say that the ALS-600 performed very well (ran cool and > didn't "fault") with the higher drive. > > > > > 73, > > Forrest Myers > > AG4ND > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.728 / Virus Database: 483 - Release Date: 7/27/04 > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
