Don, Thanks, I think I just didn't write it clearly, or you explained it better. In CWr (I think about tuning during S&P in a contest), you go from a higher pitch sounding signal to a bass sounding signal tuning from the bottom of the band up.
You might fill me in, and probably others, what is the advantage of CWr? Or is it like the sidetone frequency a preferential thing? I can see some use in a contest situation for it... Cheers, Julius n2wn --- W3FPR - Don Wilhelm <[EMAIL PROTECTED]> wrote: > Julius, > > You do have it backwards (assuming your BFOs are set > normally). In CW mode, > the pitch of the received signal becomes higher as > you tune to a higher > frequency. In CWr, the pitch goes lower as the > tuned frequency goes higher. > > If you want a 'mental memo' you might think that in > CWreverse, the signal > pitch is the 'reverse' of the tuning direction. > > 73, > Don W3FPR > > > -----Original Message----- > > > > Unless I have it backwards, when you are tuning in > on > > a signal "normal" CW will tune from the high side > to > > zero beat, in reverse you'll start hearing the > signal > > on the low side (ie the signal is at 7.025, you > will > > start hearing it around 7.0243 at a high pitch) > > Julius > > n2wn > > > > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
