Hi The KAT100-1 is $239 and includes all of the case pieces you need to build the tuner. The KAT100-2 only includes the front and rear panels to fit the EC2. You still need to purchase the EC2 and you will not use the front and rear panels that come with the EC2. The EC2 is $59 plus the KAT100-2 is $219 total $278. If you want to buy the KAT100-1 and then convert to the -2 later then you will buy the -1 for $239 then later purchase the EC2 for $59 and the panel kit for $39 for a total of $337. If the plan is to go with the tuner in the EC2 then I would buy the -2 and the EC2 as this would save you $59. You can use the KAT100-2 with or without the KPA100 installed in the EC2 but typically the KAT100 and KPA100 is installed into the EC2 and the K2 has the QRP lid. The K2 can then be used QRP or plugged into the EC2 box for QRO. Note you will need the KIO2 installed in the QRP lid for this to work as the interface signals are brought out on the 9 pin connector on the KIO2
Don Brown KD5NDB ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <Elecraft@mailman.qth.net> Sent: Thursday, April 21, 2005 10:04 AM Subject: [Elecraft] K2 KAT 100 choices > Decisions Decisions. I am getting ready to order the External KAT 100 ATU > for my K2/100. The desired end state may or may not be a K2 with the > KPA100 and KAT100 in a seperate enclosure. However for right now I just > want to get the KAT 100-2. So are there any advantages dis-advantages to > ordering the KAT 100-1 and the KAT 100PNL or should I order the KAT 100-2 > and an EC2 Blank Project. I the difference in cost is only $4, so that is > not even a consideration. > > 73 KI4DGH > Chuck G. > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
