You need an oscilloscope. --- On Tue, 9/14/10, D. R. Evans <doc.ev...@gmail.com> wrote:
> From: D. R. Evans <doc.ev...@gmail.com> > Subject: Re: [Elecraft] Settings for CM500 on K3? > To: Elecraft@mailman.qth.net > Date: Tuesday, September 14, 2010, 9:20 AM > Don Wilhelm said the following at > 09/13/2010 07:57 PM : > > > First turn the compression to zero, then increase the > mic gain until you > > see 6 to 7 bars on the ALC meter. > > Than add compression as you like. > > > > You can do all that in TEST mode. When adding > compression, you can > > listen to yourself on the monitor. > > > > Try it and see what happens - I suspect you are not > hitting the ALC hard > > enough. > > > > That is exactly what I did, since that's what the manual > says to do. > Everything looks and sounds fine on the K3 itself. It's > when I look at the > external PEP meter that the problem becomes obvious. > > Doc N7DR > > -- > Web: http://www.sff.net/people/N7DR > > > -----Inline Attachment Follows----- > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
