>> Transmit using FSK-D mode in the K3 keys the transmitter but
>> the FSK signal does not trigger the K3 to transmit both tones.
>> I hear a single tone in the monitor and the P3 also shows the
>> same thing.
Which monitor? Is your software generating shift? Do you see
the FSK LED flickering on MK II? Have you checked the cable to
see if the FSK line is correct and connected to the FSK output
pin on the MK II?
73,
... Joe, W4TV
On 10/24/2010 7:57 PM, Jim Spears wrote:
> I am trying to get my K3 operational on rtty and have run aground. Receive
> works fine. Transmit using FSK-D mode in the K3 keys the transmitter but
> the FSK signal does not trigger the K3 to transmit both tones. I hear a
> single tone in the monitor and the P3 also shows the same thing.
>
>
>
> Using the K3 utility to send rtty works fine but this is a different
> interface, bypassing the MicroKeyer 2.
>
>
>
> So the big question is "what am I doing wrong?" I have posted this to the
> MicroHam Yahoo group, it will be interesting to see where the best advice
> comes from.
>
>
>
> Details of the hardware and software configuration are available on request.
>
>
>
> Jim/N1NK
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
