I have a friend in Mali that wants to set up an AM radio some were out in the 
boonies.
No Reliable AC power etc etc third world problems import duty tax endless very 
red tape.
So the question is....
Can the K3 be made to transmit in the 1600 kc freq?
25 to 50 watts. 
Is this even a reasonable idea?

Sent from my iPad

On Dec 12, 2010, at 3:18 PM, ab2tc <ab...@arrl.net> wrote:

> 
> Hi again,
> 
> A little while ago I wrote the message below. I am still searching for ways
> to compensate for the tilt in my new 2.8kHz crystal filter. One way would be
> to have a way to set the RX equalizer through a serial command / macro. Is
> this going to happen soon? Another way would be to have the RX equalizer
> settings stored by mode so they could be different for USB and LSB. Is this
> going to happen soon? Am I really asking too much here? I spent money
> getting the 8 pole 2.8kHz filter hoping it would solve the tonality
> difference between USB and LSB, but achieved nothing. Recently there was
> somebody on here wishing that Elecraft would sort these filters weeding out
> the ones with a bad tilt. Should I order another one hoping to get one with
> a flatter response?
> 
> AB2TC - Knut
> 
> Hello all,
> 
> I recently replaced the 5-pole 2.7kHz roofing filter in my K3 with the
> 8-pole 2.8kHz hoping to get rid of the difference in tonality between USB
> and LSB. But the difference is still there. These two links show the noise
> spectrum of the receiver in USB and LSB.
> 
> http://ab2tc.getmyip.com:8000/pictures/usb.png
> http://ab2tc.getmyip.com:8000/pictures/lsb.png
> 
> In USB there is a definite upward tilt of the passband and the opposite for
> LSB. This is quite audible. Is this normal and is there anything I can do
> about it (other than asking Elecraft to add by mode equalizer)?
> 
> AB2TC - Knut
> 
> -- 
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/2-8-kHz-filter-tilt-tp5829094p5829094.html
> Sent from the [K3] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to