You have probably already checked this, but: Is the lead to the speaker plugged into P5 on th RF board? Do you get audio if you plug the headphones or a speaker into the rear Ext Speaker socket? Is the speaker itself OK, and all wiring intact?
73 Dave G3YMC On 19 Jan 2011 at 10:33, John Shadle wrote: > Hi all, > I read through the archives and am wondering if I may have fallen prey > to the "bad headphone jack" problem. I am able to hear just fine when I > have my headphones plugged in, but get no audio out of the speaker when > I remove the headphones. > > For the record, the speaker *did* work at one point...and I only > started using the rig in October. Although I do pull the headphones out > quite a bit since that's what I use to listen when I operate. This > problem started a few weeks ago and I'm just now starting to think about > trying to find a solution to it. > > I'm using the K2 with the KPA100 mounted on top. (At one point I had the > KAT100/KPA100 in the same enclosure, but I have since moved to an SGC > SG-239 at the base of my vertical and no longer need the KAT100 at this > time.) > > Any tips for troubleshooting this problem? > http://www.davesergeant.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
