Your original problem (VOX=OFF and beep) could have been caused by key-down at power-up.
Check and/or disconnect your keying lines. The K3 may then start OK. If you key via the RS-232 port, you may have a computer or cable problem. But you can't be sure until the K3 is unkeyed. 73, Paul W8TM ********************** Adriano PY2ADR sed: > After a 10 days trip i turned on my K3 and it was "blocked". No buttons working, no rx, nothing. Only the displays were working, on the lcd the msg: VOX=OFF and a continuous beep. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
