Certainly mistakes happen ... I'm just saying that I think it's 
premature to accuse Elecraft of not bothering to check the rig before it 
was shipped.  It could be a board that went bad or a connector that 
became unseated or whatever.

Dave   AB7E



On 4/20/2011 12:32 PM, Wes Stewart wrote:
> Not necessarily.  He said he worked with factory support on the telephone 
> before they said to ship it back.  I've found them to be quite helpful and 
> knowledgeable. Eric asked earlier what kind of microphone he was using. That 
> was my first thought, like no bias on an electret, but if this wasn't already 
> determined by tech support then there should be some corrective action taken.
>
> I recently had a friend come to my shack with a brand new K3 that didn't 
> transmit at all, although it received perfectly. He thought that perhaps he 
> hadn't loaded the firmware correctly.  I loaded it and we then compared his 
> to mine, parameter by parameter and found nothing wrong, except that it still 
> failed to transmit, of course. It was a weekend so calling for help wasn't an 
> option.
>
> He did later and it was finally determined that the KREF3 board was bad.  
> Failures happen.
>
> --- On Wed, 4/20/11, David Gilbert<xda...@cis-broadband.com>  wrote:
>
>> That's kind of a premature question isn't it?
>>
>> Looking forward to your future post identifying what the
>> problem turns
>> out to be ....
>>
>> Dave   AB7E
>>
>>
>>
>> On 4/20/2011 10:03 AM, Scott McDowell wrote:
>>> Hello
>>> Has anyone besides me recieved a factory built
>> k3/100/F that had no, (like in zero),
>>> output in the ssb mode. Or am I just the lucky one. I
>> worked on it for a while with
>>> support on the telephone, then they told me to send it
>> back to the factory.
>>> That sounds like someone at the factory isn't doing
>> the testing that should be done
>>> on the new rigs before they are shipped.
>>> Scott
>>> n5sm
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to