TX ALC should work in the OFF position just fine. I don't use ALC on the KPA_500 anyway so it should be fine. Gary
On 5 May 2011 13:34, John Shadle <sha...@katzenfisch.com> wrote: > OK. I'm really going to bed now--but before I do I noticed that I can > turn the TX ALC 'off' in the CONFIG menu and manually adjust the TXGN > HP for each band to achieve the 100W into the dummy load (as measured > through the LP-100A). > > Is this advisable? > > -john W4PAH > > On Wed, May 4, 2011 at 11:15 PM, John Shadle <sha...@katzenfisch.com> > wrote: > > Just did the TX GAIN CONFIG and I'm getting only ~80W into the dummy > > load on all bands. Hmmm. > > > > Thoughts? > > > > Maybe my LP-100A is poorly aligned, but I don't think so... > > > > -john W4PAH > > > -- VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 Living the dream!!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html