John, I consider myself a bit of an expert in the "multiple error messages on start-up" front! (do a search here on my callsign...)
After many months of headscratching, removing/replacing modules and even replacing chips, it turns out in my case to be poor contacts in some of the pins of the front panel connectors. My K3 #145 is not in a particularly 'hostile' environment but this will still crop up occasionally; removing the front panel and a clean of the connectors with isopropanol always cures it long term. I get multiple errors and the reason you're only getting 12W out will almost certainly be due an ERR PA1 in your list; nothing wrong with the PA module, just the software thinking it's not there. Good luck! Stewart Rolfe, GW0ETF -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-multiple-error-messages-on-start-up-tp6332972p6333417.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
