HI Group, I have it up and running.
I am amaized on how far your signal can be heard with only 1 watt WOW. Now I have to work on that JP65 mode. Don KD8NNU On Sun, May 29, 2011 at 9:16 PM, John Ragle wrote: > These are the settings I have used... > > To run WSJT on K3 with SignaLinkUSB: > > (The soundcard settings that FLDIGI takes care of automatically, when > set up, must be done MANUALLY in WSJT. Otherwise, the setup is the > same.) > 1.K3 in “TX DATA” > 2.K3 at 50.260 (for six meter operation) > 3.K3 with “CONFIG” “LINE OUT” ~ 20. This depends on Digital Gain > Setting on SpecJT (lower right-hand side). > 4.SignaLink-USB ON > 5.PC “Playback Devices” (right-click on speaker mini-icon) must have > “Speakers USB Audio Codec” as “Default Device” > 6.PC “Recording Devices” must have “Microphone USB Audio Codec” as > “Default Device” > (Items 5 and 6 are the soundcard settings, obviously) > > John Ragle -- W1ZI > > ===== > > On 5/29/2011 8:17 PM, gold...@charter.net wrote: >> Would someone who is using the WSPR software share how they have the >> setup configured for the K3. >> >> I can not get it to go to TX. I have something wrong with either the >> CAT or PTT settings. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
