Problem found! With the help of Paul at Elecraft support we found the problem.
If the PR6 is activating DIGOUT1 Of The K3 KPA500 while when the K3 is in transmit mode. This will require (hopefully) a firmware modification to one or both units. Many thanks to Dale Farmer at Elecraft Support for helping me sort it out via phone. 73, Tom Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member On Wed, 29 Jun 2011 13:50:33 -0500, n...@n5ge.com wrote: >Does anyone have this combination working? > >K3, KPA500 and KRC2. > >AUX Cable connected to the KPA500, then connected to one side of the supplied Y >cable, which is connected to the K3 ACC connection. The other side of the Y >Cable is connected to the KRC2. > >With this connection the Amplifier will not key, although it is communicating >with the K3 in both directions. > >Since all of my antennas are switched by the KRC2 I am unable to use the Amp on >the antennas. > >The Elecraft Support folks told me to put the Key Line interrupter in the line >that connects to the KRC2. That does not work. > >I'm getting a little frustrated at not being able to use the KRC2 with the amp >Aux cable connected. > >73, >Tom >Amateur Radio Operator N5GE >ARRL Lifetime Member >QCWA Lifetime Member > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
