Ron, Have you removed the top cover to check that the speaker connector is plugged in. If not, that is the first thing I would check.
73, Don W3FPR On 7/25/2011 5:26 PM, Ron N5QQ wrote: > I have two K3's on the operating desk that are very similar except in > one way and I can not fine the setting or configuration to correct it. > At present both the rigs are set SPKRS+PH = NO and SPKRS = 1. This > gives me the internal speaker only when headphones are not plugged in, > and then headphones only (no speaker) when they are plugged in. > BUT the LH rig gives me headphones when they are plugged in (no > speaker) and NOTHING at all when the headphone jack is unplugged. This > is acting like I have external speakers plugged in, which I don't > have. Am I missing something obvious? > At this time there is no SO2R mic/phones/cw controller involved and > the only other connection is the interface to my PC (with N1MM). > Ron > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
