Bill, What you are "missing" is that many operators *do* use compression and TX EQ for SSB work. DATA A is the same as SSB, but TX EQ is automatically turned off and the compression setting is set to zero. Other than those two items, DATA A is just like SSB - Oh, it will also remember that the audio input is on LINE IN (and remember the level) while one of the mic jacks is active for SSB mode.
If you never use voice SSB, your setup is just fine, but if you ever plug in a microphone to use SSB for voice work, you will likely end up setting up DATA A so you don't have to change menu entries and mess with the level settings when switching from voice to JT65 73, Don W3FPR On 8/12/2011 4:40 PM, cqbi...@q.com wrote: > I continue to be puzzled by this thread. Given that WSJT (all modes) is > WRITTEN for use on USB by Joe Taylor, WHY would we be interested in utilizing > any K3 mode but USB? > > I have operated 441 and JT65 utilizing my K3 off the Moon, tropo and MS > with no desire to fuss with any other K3 "mode". The K3 works great on USB > ... end of story. > > Here, USB, no equalization, 2.7Khz filter (5 pole), no compression. M > Audio Delta 44 Soundcard, XP dual core machine and no "audio" interface and a > homebrew Opto-isolator for PTT > > In the log:: > > 34 - QSOs JT44 > 702 - QSOs JT65 > 35 - QSOs JT6M > 1057 - QSOs 441 > > Many hours of HF WSPR as well. > > Not all with the K3 ... but many!! > > What am I missing??? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html