Hello Michael. Two things come to mind- 1.- I assume you have the 13 KHz FM filter installed, and that is the one you have selected for FM mode. 2.- Have you checked the FM deviation setting in the CONFIG: FM DEV menu item? It defaults to 5 KHz deviation, which is standard in the USA. I believe much (or all) of Europe uses a narrow channel spacing, requiring a lower deviation?
Perhaps one of these suggestions may help you. Here, my FM receive audio is fine. 73, Bruce, N1RX > Hello, > from my point of view the K3 is one of the best sounding radios on AM and > SSB. > But i observed a lack of quality on FM-the sound is very thin compared to > AM and SSB. > It seems that the DSP cuts out the range from 400 to 2700Hz (uuh!). > Measured with my analyzer, i can send those graphs to anyone who may > concern. > No matter how the EQ is adjusted. > Any ideas are welcome > 73 > Michael ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
